SKU: MSC-202A-V2
2-Port RS-232 PCI Express Card, Support Power Over Pin-9
In Stock
Antaira Technologies MSC-202A-V2 PCI Express I/O adapter provides 2 high performance 16C950-type UART compatible RS232 serial card expansion ports. The MSC-202A-V2 can provide added serial ports for a client, or server application to provide instant COM port expansion via the PCI Express Bus (PCIE).
PCI Express provides a scalable, high-speed, serial I/O bus that maintains backward compatibility with PCI applications and drivers. The MSC-202A-V2 two ports RS-232 architecture defines a high-performance, point-to-point, scalable, serial bus at speed of 250Mbytes/sec to 4GBytes/sec (and 8Gbytes/sec in the future).
The card is fully PCI Express Plug-and-Play compatible and no IRQ and I/O address conflict problems. The MSC-202A-V2 provides the scalability to quickly adapt to new PCI Express technologies. It allows you to add multiple serial port connectivity as needed through a single PCI-E serial card.
(MSC-202A-V2)
- Full x1 PCI Express Throughput, 250Mbytes/sec
- Fully Compliant with PCI Express Base Specifications, Revision 1.0a
- PCI Express Advanced Error Reporting Capability Including ECRC Support
- UARTs Fully Compatible with 16C550-type Devices
- Baud Rate up to 921.6Kbps
- 128-byte Deep FIFO per Transmitter and Receiver
- Detection of Bad Data in the Receiver FIFO
- 9-bit Data Framing, as well as 5,6,7 and 8 bits
- Provides 5V or 12V Power over Serial Connectors
- Automated In-band Flow Control Using Programmable Xon/Xoff in Both Directions
- Automated Out-of-Band Flow Control Using CTS#RTS# and/or DSR#DTR#
System | Fully Compliant with x1 PCI Express Base Specifications 1.0a |
OS Support | Windows 95/98/Me, NT, 2000, XP, 2003, Vista, Windows 7, and Linux |
Operating Temperature | 0 to 55°C (32 to 131°F) |
Operating Humidity | 10% to 90% relative humidity (non-condensing) |
Storage Temperature | -40 to 75°C (-40 to 167°F) |
Storage Humidity | 5% to 95% relative humidity (non-condensing) |
Dimensions | 4.72 x 2.60ö (12.00 x 6.60cm) |
Serial Ports | 2 x DB9-Male Connectors |
Host Controller | Fully 16C550 and 16C950 UART compatible |
FIFO | 128-byte High Performance FIFO size |
Baud Rate | Up to 921.6Kbps |
Data Bits | 5, 6, 7, 8, 9-bit Data Framing |
Flow Control | Automated in band flow control using programmable Xon/Xoff in both directions |
Data Signal | Automated out-of-band flow control using CTS#RTS# and/or DSR#DTR# |
Power Over Serial | Provides 5V or 12V over DB9 Connectors |
SKU | MSC-202A-V2 |
Brand | Antaira |
Others Also Bought

2-Port (RS232/422/485) Industrial IEEE802.11b/g/n Wireless Serial Device Server, w/Bridge Mode ***
$637.43
including GST
More From This Category

2-Port RS-232 PCI Express Card with Oxford Single Chip, Support Power Over Pin-9
$100.19
including GST

2-Port RS-232 PCI Express Card, Low Profile (Support Power Over Pin-9)
$114.71
including GST

2-Port RS-232 + 1-port Parallel PCI Express Card, Low Profile (Support Power Over Pin-9)
$100.19
including GST

2-Port RS-232 + 1-port Parallel PCI Express Card, Low Profile (Support Power Over Pin-9)
$114.71
including GST

4-Port RS-232 PCI Express Card with Oxford Single Chip, Support Power Over Pin-9
$143.75
including GST